Skip to content
-
Kudoflix Video Editing

good stuff about video making

Kudoflix Video Editing

good stuff about video making

  • Home
  • Home
Close

Search

Family sharing a moment of conversation
Video

How to Fix Video and Audio Sync Problems Step by Step

By mandrixx
November 18, 2026 12 Min Read
0

To fix audio that is out of sync with video, first work out which of three problems you have: a playback glitch on one device, a fixed delay baked into the file, or drift that grows as the video plays. Playback glitches are fixed in the player or on the TV. A fixed delay is fixed by sliding the audio on an editing timeline. Drift is fixed by correcting the audio’s length so it matches the picture. This guide walks through each one in plain steps, and you can do the editing part in your browser with nothing to install.

Kudoflix
Edit Videos Without Installing Software
Use Kudoflix’s user-friendly online video editor, with templates, transitions, and visual effects to enhance your video projects.
Visit

Key Takeaways

  • Play the file on a second device or player first. If it looks fine there, the file is not the problem.
  • Check the start, middle and end of the video. The same gap everywhere means a fixed delay. A gap that keeps growing means drift.
  • A fixed delay is solved by moving the audio on the timeline. Drift needs the audio stretched or compressed to match the picture, because moving it once will not help.
  • For sound recorded on a separate device, a clap at the start of each take gives you a sharp mark to line up.
  • Always edit a copy and export a short test before you do the whole video.

Table of Contents

  • Why audio and video fall out of sync
  • Step 1: Find out whether the file or the playback is at fault
  • Step 2: Decide whether it is a fixed delay or drift
  • Step 3: Fix a fixed delay on the timeline
  • Step 4: Fix drift that gets worse over time
  • Step 5: Sync sound that was recorded separately
  • Step 6: Check the result properly
  • How to stop it happening again
  • Fix it online with Kudoflix
  • Our perspective
  • FAQ
  • Sources

Why audio and video fall out of sync

Video and sound travel through a device as two separate streams. Roku’s support team explains that audio and video are processed independently, so they may not finish at exactly the same moment, and a timing error can result. The same page lists poorly made content, transmission errors, heavy formats such as 4K or HDR, and a TV’s picture or sound processing settings as possible contributors.

For family videos, slideshows and club recordings, the causes usually fall into a few everyday situations:

  • A weak phone, tablet or TV. The device struggles to keep up while playing a large file.
  • A soundbar, speaker or Bluetooth headphones. Sound that passes through extra hardware can arrive late.
  • A separate microphone. You recorded the sound on one device and the picture on another.
  • A long recording. Two devices keep time with slightly different internal clocks, so a small gap grows. No Film School’s Henri Rapp notes that clock differences accumulate into drift on takes of 30 to 40 minutes or longer.
  • A bad edit or export. Something went wrong when the clips were merged or saved.

The first three are often not a problem with your video at all. That is why the first step is always to test.

Step 1: Find out whether the file or the playback is at fault

Before you edit anything, spend two minutes on this check. It can save you an hour.

  1. Play the same file on a different device, such as your phone and then your laptop.
  2. Play it in a different player or app.
  3. Remove extras: unplug the Bluetooth headphones or soundbar and listen through the built-in speakers.

If the sound lines up on one device and not another, your file is fine. The fault is in the device or its audio path. Sony’s support page suggests checking whether the problem happens on another channel or source, securing the cables, updating the TV software and using the audio delay or A/V sync setting on a connected home theater system if it has one.

If the problem follows the file everywhere, it is in the file. Move on to Step 2.

A quick fix for VLC on a computer

If you watch the file in the VLC player and only that player is off, you can adjust it live. The VLC documentation says that during playback you press K to delay the audio or J to advance it. For a precise number, open Tools, then Track Synchronization, and enter a positive value to advance the audio or a negative value to delay it.

This only changes what you hear in that player. It does not repair the file. If you plan to share or upload the video, the sound will still be off for everyone else, so fix the file itself in an editor.

Step 2: Decide whether it is a fixed delay or drift

This is the step most quick guides skip, and it decides which fix works. Do not judge by ear while dragging a track around. Measure.

Open the video and pick three moments with an obvious sound and visible action, such as a clap, a door closing, a word spoken straight to the camera or a bat hitting a ball. Check the start, the middle and the end. Write down how far the sound is from the picture at each point, even roughly, for example in tenths of a second.

What you see What it means What fixes it
Sound is 0.5 seconds late at the start, middle and end Fixed delay Slide the audio once on the timeline
Sound is perfect at the start, a little late in the middle, far off at the end Drift Stretch or compress the audio to match the picture length
Sound is fine at first and then jumps out of sync partway through A cut, a missing section or a bad merge Split at the jump and realign each part separately

The logic is simple. If the gap is the same everywhere, one move corrects it. If the gap grows, one move only shifts the problem from the end to the start.

Step 3: Fix a fixed delay on the timeline

A fixed delay is the easy case. In any timeline editor, the picture and the sound sit on separate tracks, and you slide the sound track left or right until it lines up. Here is the routine.

  1. Work on a copy. Keep your original file untouched so you can always start over.
  2. Put the video on the timeline so you can see its sound track as a waveform if your editor shows one, or at least hear it while scrubbing.
  3. Zoom in on a clear moment, such as the first clap or the first word of speech.
  4. Move the audio in small steps until the sound hits at the same instant as the action. If the sound comes late, move it earlier. If the sound comes early, move it later.
  5. Check the end of the video. If it still lines up, you had a fixed delay and you are done. If it is now off in the opposite direction, you have drift, so go to Step 4.
  6. Export a short test and watch it on a different device from the one you edit on.

This is where an online editor helps people who do not edit often. Kudoflix runs in your browser with no download or installation, and it offers a timeline editor along with cutting and merging, so you can work on your video straight from the page. If you are new to timelines, our guide to how a video editing timeline works explains tracks, playhead and zoom in plain terms.

A small tip: when the gap is only a fraction of a second, the human eye is more forgiving of sound that arrives slightly after the picture than sound that arrives before it, because that is how things work in real life, where light reaches you before sound. If you cannot get it perfect, aim for the sound landing right on or a hair after the action.

Person clapping hands at the moment of impact

Step 4: Fix drift that gets worse over time

Drift happens when the sound and picture are the right length for different durations. The start matches, but the sound slowly gets ahead of or behind the picture. It is common with long recordings from two devices, such as a lecture filmed on a phone with sound from a separate recorder, or a club event captured on a camera with a microphone on the stage.

A single slide of the sound track cannot fix this, because the gap is different at every moment. You need to change the audio’s length, not its position. Here is the routine.

  1. Measure the gap at the start and at the end. For example, in a 20-minute video the start is perfect, and at the end the sound is 1.2 seconds behind.
  2. Align the start of the sound with the picture.
  3. Split the video at the end point where you measured the gap, and note how far off it is.
  4. Change the audio’s speed slightly so it is that much shorter or longer. If the sound is behind at the end, you need it to run a touch faster. If it is ahead, you need it a touch slower. The change is tiny, usually a fraction of a percent, and the pitch change is not noticeable at that size.
  5. Check the middle. If the three checkpoints line up, the drift is fixed.
  6. Export a short section and check the end in particular.

If stretching the audio over the whole video is awkward, there is a practical alternative for long recordings. Cut the video into shorter chunks, for example every five minutes, and realign the sound at each cut. Each chunk then has too little time to drift noticeably.

As a rule, the best cure for drift is prevention. See the section below on recording so that it does not happen.

Step 5: Sync sound that was recorded separately

Many families and clubs now record picture on a phone and sound on a better microphone, or record a speaker’s talk on a laptop while filming the room. This is called dual-system sound. The two recordings start at different moments, so they never line up on their own.

The simple and reliable method is a clap.

  1. At the start of each take, clap your hands once in front of the camera, loud and clear. Both devices then capture the same sharp sound, and the camera also captures the hands coming together.
  2. Import both files into your editor and place them on the timeline, the video on one track and the separate sound on another.
  3. Zoom in on the first few seconds. A clap shows up as a sharp spike in the waveform, and as the frame where the hands meet in the picture.
  4. Slide the separate sound until its spike lands on the frame of the clap.
  5. Mute the camera’s own sound once the better recording is lined up, so you do not hear an echo.
  6. Check the end. For anything longer than a few minutes, clap again at the end of the take. If the two claps do not line up, you have drift, so apply Step 4.

No clap? Look for another sharp event that both recordings captured, such as a slammed door, a first spoken word or the start of applause, and line those up by eye and ear.

Sounds recorded for music projects are a special case, because the song has to match the cuts as well as the lips or the action. If you are editing a video to a track, our guides on cutting to the beat and music sync editing techniques show how to place cuts on the music. For a view of how a song-length project looks when built around a finished track, you can browse ready-made music videos from a marketplace of musicians.

Step 6: Check the result properly

A fix you only tested inside the editor is not a finished fix. Do these checks before you share.

  • Export a test of the whole video, or at the least of the first and last minute, and play it on a different device.
  • Check three points again: the beginning, the middle and the end.
  • Listen without headphones too. Bluetooth headphones add their own small delay, which can make a good file seem wrong.
  • Keep the original until you are sure the exported file is right.

This matters because a correction you hear in a player’s audio delay control is only a test of a number. It does not mean a corrected video has been saved. Comparing the source and the exported file in the same player is the reliable way to tell whether the problem sits in the file or in playback.

How to stop it happening again

Most sync problems are easier to prevent than to fix. A few habits do almost all the work:

  • Record picture and sound on the same device whenever you can. A modern phone does this well, and sound and picture then share one clock.
  • Clap at the start of every take when you use two devices, and again at the end of long ones.
  • Break long events into several shorter recordings. Stopping and starting the recording resets any gap that was building up.
  • Keep the phone up to date and free of other work while it records, and make sure there is spare storage, because a device under strain can drop frames.
  • Do not edit the original. Always work on a copy and keep a safe version of the raw footage.
  • For serious multi-camera work, professional crews tie their devices to one shared clock, using timecode and external sync, so the recorders never drift. You rarely need this for family and club videos, but it explains why professionals have fewer drift problems.

Fix it online with Kudoflix

If you would rather not install a heavy editor for a ten-minute repair, Kudoflix gives you a timeline editor in the browser, with cutting, merging, text, filters and royalty-free music in the same place. There is a free plan at $0 per month. Starter costs $9.99 per month, or $83.88 per year, and Pro costs $12.99 per month, or $119.88 per year. You can compare them on the Kudoflix pricing page, or look at the free version first.

Our perspective

Most people who write to us about sync problems believe they have done something wrong. Usually they have not. A phone, a microphone and a TV each keep their own time, and nobody has told the family that a small gap is normal.

We built Kudoflix for the people in that situation: families, clubs, teachers and small business owners who want a good video without learning a professional program. That is why it runs in the browser, with no download and no installation, and why it has a timeline that lets you see your clips instead of guessing.

Our advice is simple. Measure before you fix. Fix the file, not just the player. Export a test and watch it somewhere else. Those three habits solve most sync problems, and they work in any editor with a timeline.

We designed our cloud processing to deliver good results even on low-end devices, so an older laptop should not be the reason you give up on a video project.

Mandrixx

FAQ

Why is my audio out of sync with my video on only one device?

If the file looks right on a second device, the problem is the playback path, not the file. Weak hardware, a soundbar, Bluetooth headphones or the TV’s own picture and sound processing are the usual causes. Try built-in speakers, update the device, or use its audio delay setting.

How do I fix audio delay in a video I already recorded?

Put the video on an editing timeline, zoom in on a clear sound such as a clap or a spoken word, and slide the audio until it lands on the matching action. Then check the end of the video. If the gap there is different, you have drift, and the audio needs a small speed change as well as the first move.

What is the difference between delay and drift?

Delay is the same gap from start to finish, and one move of the sound track fixes it. Drift is a gap that grows as the video plays, and it needs the audio’s length corrected. Measure the gap at the start, middle and end to see which one you have.

How do I sync audio recorded on a separate microphone?

Clap once in front of the camera at the start of the recording. In the editor, line up the sharp spike of the clap in the sound with the frame where the hands meet in the picture. Then mute the camera’s own sound, and check the end of the clip for drift.

Does changing the delay in VLC fix the video file?

No. VLC’s track synchronization changes only how that one player plays the file, and the setting resets when the file or player closes. To repair the video for everyone who watches it, correct the audio in an editor and export a new file.

Sources

  • Roku Support: Sound is out of sync
  • Sony Support: Audio delay on my TV, or audio and video out of sync
  • VLC Desktop User Documentation: Adjustment and Effects
  • No Film School: How to Sync Audio for Modern Video Production Workflows

Recommended

  • Music Sync Video Editing Techniques for Pro Results
  • How to Remove Background Noise From a Video Fast
  • Music Video Project Editing Guide for Creators
  • Step by Step Tutorial Video Editing: Beginner’s Guide
Author

mandrixx

Follow Me
Other Articles
Woman arranging old family photos into sequence
Previous

Photo Slideshow Storytelling: Turn Photos Into a Story

No Comment! Be the first one.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Recent Posts

  • How to Fix Video and Audio Sync Problems Step by Step
  • Photo Slideshow Storytelling: Turn Photos Into a Story
  • How to Add a Voiceover to a Video: Record, Sync and Mix
  • Keyframe Easing: How to Make Animation Smooth
  • How to Edit Large Video Files Online, Step by Step

Recent Comments

  1. Jacob Yang on Video Reel Guide for Creators: Build Attention-First Reels
  2. viral video ai video studio on Call to Action in Video: How to Write, Place and Add One
  3. AI attractiveness test on Video Overlays: A Complete Guide for Creators in 2026
  4. cici on Keep 1080×1920 TikTok Quality Editing on Desktop, Preview on Phone
  5. plinko idle game on How to Make a Slideshow on Facebook in 2026

Archives

  • November 2026
  • October 2026
  • September 2026
  • August 2026
  • July 2026
  • June 2026

Categories

  • Video

Copyright 2026 — Kudoflix Video Editing. All rights reserved.