Skip to content
-
Kudoflix Video Editing

good stuff about video making

Kudoflix Video Editing

good stuff about video making

  • Home
  • Home
Close

Search

Faded picture with black bars above and below
Video

How to Remove Black Bars From a Video

By mandrixx
November 11, 2026 13 Min Read
0

To remove black bars from a video, first work out whether they are baked into the file or added by the screen or player, then crop or zoom the picture until the bars fall outside the frame, and reframe so nothing important gets cut. In a browser editor like Kudoflix, you do this on a timeline with framing and keyframe tools and no software to install. The whole job takes a few minutes once you know which kind of bar you have.

Most bad results come from skipping the first step. Bars that belong to the player cannot be edited away, and bars that sit inside the file need a different fix: a crop, a zoom or a new canvas shape. Below you will find how to tell them apart, which fix to pick, how to avoid distortion, and what to do when the bars come back on vertical platforms.

Kudoflix
Reframe Videos Without Installing Software
Kudoflix lets you edit videos in your browser with framing tools, timelines, and templates, so you can adjust the picture without downloads.

Visit

Key Takeaways

  • Bars at the top and bottom are letterboxing, bars at the sides are pillarboxing, and bars on all four sides are windowboxing. Each has a different cause and a slightly different fix.
  • Before you edit, check whether the bars are inside the video file. If they are, crop or zoom. If the player adds them, change the project shape instead.
  • Zooming or cropping fills the frame but trims the edges, so reframe the subject afterward. Stretching fills the frame too, but it distorts people and objects.
  • When cropping would cut faces, text or product labels, use a blurred or colored background, a split layout or keyframed movement instead.
  • Kudoflix runs in your browser with framing, keyframes, timelines and templates, with a free plan to start.

Table of Contents

  • What the black bars are and why they appear
  • Step 1: Find out whether the bars are in the file
  • Step 2: Pick the right fix for the situation
  • Step 3: Remove the bars by cropping or zooming
  • Step 4: Reframe so nothing important is cut
  • Step 5: Export in the shape the platform expects
  • Bars at the top of a vertical video
  • When to keep the bars or use a background
  • Mistakes that bring the bars back
  • Remove black bars in Kudoflix
  • FAQ
  • Sources

What the black bars are and why they appear

The bars have names. When widescreen content is shown on a narrower screen, bars appear at the top and bottom: that is letterboxing. When narrow content is shown on a widescreen display, bars appear at the sides: that is pillarboxing. According to Swank Motion Pictures’ explanation, both preserve the original aspect ratio without distorting the picture. The same source describes windowboxing: bars on all four sides, which typically happens when content that is already letterboxed or pillarboxed is shown inside another player that adds its own framing.

Old landscape print with bars on every side

The cause is almost always a mismatch of shapes. Sony’s support article explains that films and shows are made in different aspect ratios, such as 2.35:1 or 2.40:1 for blockbuster movies and 1.33:1 for older classics, and the image is reduced to fit the screen while keeping its proportions. Emby’s guide puts it the same way: a wide film on a taller screen leaves unused space above and below, while a narrow picture on a wider screen leaves space at the sides.

In practice, you meet these mismatches in a handful of everyday situations:

  • A phone clip filmed vertically, dropped into a horizontal project. You get bars on the left and right.
  • A cinematic widescreen clip placed in a square or 16:9 project. You get bars above and below.
  • A video exported from another app with the bars already drawn into the picture.
  • A clip that was recorded in one shape, uploaded to a platform that wraps it in another.
  • An old family video in 4:3 shown on a modern widescreen display.

So the same symptom, a black strip, can have four or five different origins. That is why diagnosing comes before fixing.

Step 1: Find out whether the bars are in the file

There are two kinds of bars: bars that something adds around the picture when the shapes differ, and bars that are part of the picture itself, stored in the pixels of the file. You can only crop away the second kind. The first kind disappears when the project shape matches the video.

A simple test works every time:

  1. Open the original file in a plain player and pause on a bright frame. A dark frame can hide the edge of the bars, so pick a scene with a light background.
  2. Take a screenshot of the video area, or export a still frame from your editor.
  3. Look at the still on its own. If the black strips are visible inside the still, they travel with the file. If the still shows a full picture with no strips, the bars come from the screen or the project.
  4. Play a few seconds and watch whether the edge of the bar stays fixed while the camera moves. A fixed edge means a bar baked into the video. Moving black belongs to the scene.
  5. Check the corners and the moment where one shot cuts to the next. Some files have bars on only some shots.

Watch for text, too. Subtitles and burned-in graphics are often placed inside the black band. If yours are, cropping the band will cut them. In that case, plan to re-add the text as an editable title once the picture is cropped.

The result tells you which branch to follow:

What you see Likely cause Fix
Bars visible in an exported still Baked into the file Crop or zoom the picture past the bars
Bars only while editing, not in the file Project shape differs from the clip Change the canvas shape or the scaling mode
Bars only on one platform or screen The player adds them Match the delivery aspect ratio
Bars on all four sides Already-framed content inside another frame Crop the inner bars, then match the canvas

If you want a refresher on shapes before you continue, our video aspect ratio guide covers which ratio suits which screen.

Step 2: Pick the right fix for the situation

Once you know where the bars come from, there are only a few ways to deal with them. Each trades something away, so choose on purpose.

Fill the frame. The picture is scaled until its shortest side meets the canvas edge, and whatever overhangs is cropped. This is the standard way to remove bars, and it keeps proportions intact. You lose the outer edges of the picture.

Crop the bars out. If the bars are in the file, you trim exactly the black area. If the remaining picture has a different shape from your canvas, you then fill or fit the canvas. Our explanation of what video cropping actually does to your footage goes through what is kept and what is discarded.

Change the canvas. When the mismatch is genuine, such as a 9:16 phone clip in a 16:9 project, the cleaner option is often to change the project’s shape to match the footage and its destination. That removes the bars without trimming anything.

Stretch. This fills the frame by pulling the picture wider or taller. It is the one option to avoid for ordinary footage: Sony notes that stretching or zooming to get rid of the bars will distort the image or cut off parts of what was filmed. Stretch has one legitimate use, which is anamorphic footage that was squeezed on purpose and needs to be expanded back to its true shape.

A quick way to decide:

  • Is the picture you care about completely inside the bars? Crop or fill.
  • Are people near the edges of the picture? Change the canvas or use a background rather than cropping.
  • Is the footage anamorphic? Stretch is the correct tool, and only for that.
  • Is it a mix of clips with different shapes? Set one project shape, then reframe each clip individually.

Step 3: Remove the bars by cropping or zooming

Here is the routine for a clip whose bars are inside the file, for example a horizontal strip across the top and bottom of a 16:9 video.

  1. Create a project in the shape you want to deliver. Pick 16:9 for a standard widescreen result, 9:16 for phones, 1:1 for squares. Choosing this first prevents a second round of bars later.
  2. Place the clip on the timeline and look at the preview. If bars show on the sides or the top, you are seeing the mismatch.
  3. Scale the clip up until the black area leaves the frame on every side. You want the smallest zoom that does the job, so you keep as much picture as possible. Zoom in small steps and check all four corners.
  4. Move the picture horizontally or vertically so the subject sits where it should in the frame. A zoom that is centered on the middle of the picture often cuts a head or a caption at the top.
  5. Check the edge. Zoom the preview in and look for a thin sliver of black or gray at a border. Compression can leave a one- or two-pixel line that is easy to miss on a small preview. Add a few percent more scale if you see one.
  6. Play the whole clip. Shots with different framing may need a different position.

The quality cost is worth understanding. Zooming enlarges pixels, so the more bar you cut, the softer the picture can look. A 4K source cropped into a 1080p project holds up well because it has pixels to spare. Our comparison of 1080p and 4K video explains how much headroom each resolution gives you.

If a clip also needs trimming at the start or end while you are here, our guide on how to cut video fast without losing quality shows the quickest way.

Step 4: Reframe so nothing important is cut

Filling the frame is mechanical. Reframing is the editorial part, and it is what separates a polished result from a clip that looks cropped by accident.

After removing the bars, look for these at the edges:

  • Faces. Heads cut off at the forehead or chin are the most common error. Move the picture so the face has some room above it.
  • Text. Lower thirds, subtitles, logos and scoreboards often sit near the edges. If the crop touches them, move them or rebuild them as titles.
  • Products. If a label or product sits at the edge, shift the picture so it sits comfortably inside.
  • Action. If the subject moves across the frame, a single position will not work for the whole shot.

The last point is where keyframes help. Set one position at the start of the shot and another where the subject has moved, and the frame follows the action smoothly instead of leaving the subject at the edge. Kudoflix includes framing and keyframes in its editor, and our framing workflow for browser video editing walks through six steps with templates.

One practical habit saves rework: reframe at the end of editing a shot, not before. Cuts and speed changes shift where the important moments land, and reframing once at the end avoids doing it twice.

Step 5: Export in the shape the platform expects

The last place bars sneak in is export. If you export in a shape that differs from where the video will be played, the platform or screen adds bars again. Match the export to the destination:

  • Standard video sites and presentations: 16:9.
  • Short vertical feeds on phones: 9:16.
  • Square feed posts: 1:1.

A mixed project causes confusion because one clip may look right while another has bars. Set the project shape once, as in step 3, and check every clip before you export. Our guide to vertical versus horizontal video explains when each orientation wins, and the page on the most engaging formats on TikTok, Instagram and YouTube lists the formats the main platforms favor. If the file format is part of your problem, see our practical guide to common video formats.

Bars at the top of a vertical video

Black bars at the top and bottom of a vertical video usually mean a horizontal clip sits inside a 9:16 canvas. The fix is the same as above, with one difference: a horizontal clip is much wider than a vertical frame, so filling the frame removes a large slice of the picture. A 16:9 clip filling a 9:16 canvas keeps roughly a third of its width.

That is fine for a single speaker in the middle of the shot. It is a poor fit for a wide landscape or a group. For those, use one of these instead of a hard crop:

  • A blurred copy of the same clip scaled to fill the background, with the sharp original centered in front.
  • A solid or branded color background behind the full picture.
  • A split layout, with two pieces of footage stacked. Our split screen video workflow includes a 9:16 template for this.
  • Keyframed movement, panning across the wide shot so each part gets its moment.
  • A less extreme shape, such as 4:5 or 1:1, which keeps more of the picture.

A picture-in-picture layout is another way to fill a tall frame with purpose. See the creator’s guide to picture-in-picture editing for how to set it up.

When to keep the bars or use a background

Removing bars is not always the right move. Sony’s advice is that the aim is to see everything that was originally filmed, not to fill every pixel of the screen. A film shot in 2.39:1 will look as the director intended with its bars, and cropping it into 16:9 removes picture from both sides.

Keep or replace the bars when:

  • The scene has important content at the edges, such as a group portrait or a wide landscape.
  • Subtitles or graphics live inside the band.
  • You are delivering to a platform that adapts to the video’s own shape, so the bars would not be added there.
  • The footage is cinematic and the wide look is part of the intent.

In those cases, replace the black with something designed: a blurred background, a color from your brand, or a subtle texture. It turns a technical gap into a deliberate layout. If your project is a family slideshow with photos of different shapes, this is usually the best choice, because every photo keeps its full composition. Our video templates handle mixed shapes with ready-made layouts.

Mistakes that bring the bars back

  • Editing before choosing the canvas. Every clip then needs fixing individually. Set the shape first.
  • Cropping a little at a time and forgetting corners. A sliver survives in one corner and shows after export.
  • Stretching to hide the problem. Faces get wider and circles turn into ovals. Use fill and reframe.
  • Judging on a dark frame. The edge is only obvious against a bright scene.
  • Exporting in the wrong shape. The platform adds fresh bars on playback.
  • Ignoring burned-in text. Cropping removes it, so rebuild it as a title.

Remove black bars in Kudoflix

Kudoflix is an online video editor, so there is nothing to download or install: open it in your browser and start on the timeline. It includes framing and keyframes for reframing, text and typography options for rebuilding captions, color filters, and a library of templates, transitions and effects. The online video editor is the place to start, and the pricing page lists every plan.

The plans as published: FREE is $0 per month. STARTER is $9.99 per month or $83.88 per year. PRO is $12.99 per month or $119.88 per year. The paid plans open up advanced features and content libraries.

What we think about black bars

Most people who search for this are not trying to learn video theory. They have one clip that looks wrong and want it to look right in the next ten minutes. That is why we built Kudoflix to run in the browser, with no download and no installation, and with an interface meant for any age and skill level.

The editors who do this well all follow the same order: diagnose, choose the shape, fill, then reframe. The fill step is automatic work. The reframe step is where taste goes, and it is where timelines and keyframes matter, because a crop that follows the subject looks intentional.

We also think black bars deserve a better answer than a hard crop every time. A family slideshow with photos of mixed shapes, a club presentation, a school lesson: those are better served by a clean background and a good template than by trimming faces. That is the reason our library of exclusive templates, transitions and effects sits beside the framing tools, so one place covers both the fix and the finish.

Our cloud processing is designed to give professional-quality results even on low-end devices, so the fix does not depend on how powerful your computer is.

Mandrixx

FAQ

What are the black bars in videos called?

Bars at the top and bottom are called letterboxing, and bars at the left and right are called pillarboxing. Bars on all four sides are known as windowboxing. They appear when the shape of the video differs from the shape of the screen.

How do I remove black bars from a video without stretching it?

Scale the clip up uniformly until the bars leave the frame, then move the picture so the subject stays inside. Uniform scaling keeps proportions, so faces and objects look natural. Stretching pulls width and height by different amounts and distorts the image.

How do I get rid of the black bars at the top of a TikTok video?

The bars usually mean a horizontal clip sits in a vertical canvas. Set your project to 9:16, fill the frame and reframe the subject, or keep the full picture and fill the space with a blurred or colored background. Our vertical versus horizontal guide shows how to choose.

Why do black bars still show after I crop?

Often a thin sliver of black remains at one edge, or the export shape differs from the project shape. Zoom the preview to inspect all four corners, add a few percent of scale, and export in the same shape as the project.

Can I remove black bars on a free plan?

Yes, you can start with the FREE plan at $0 per month, which lets you try the editor on a simple project. STARTER and PRO add advanced features, assets and content libraries when you need them.

Sources

  • Swank Motion Pictures: Why are there black bars around my content?
  • Sony Support: Black bars are displayed on the top and bottom of the TV
  • Emby Learn: Letterboxing and Pillarboxing

Recommended

  • How to Remove Background Noise From a Video Fast
  • Auto Detect, Quick Human Review: Censor Video Without Ruining Footage
  • How to Cut Video Fast Without Losing Quality
  • Tips for Smooth and Fast Editing
Author

mandrixx

Follow Me
Other Articles
Cruise ship wake stretching toward a coastline
Previous

Video for a Cruise Operator: Plan, Shoot and Edit It

Pencil storyboard sketches on a table
Next

Video Storytelling Techniques: A Practical Guide to Telling a Story on Screen

No Comment! Be the first one.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Recent Posts

  • Photo Slideshow Storytelling: Turn Photos Into a Story
  • How to Add a Voiceover to a Video: Record, Sync and Mix
  • Keyframe Easing: How to Make Animation Smooth
  • How to Edit Large Video Files Online, Step by Step
  • Collage Tool Guide: Photo and Video Collage Makers Compared

Recent Comments

  1. Jacob Yang on Video Reel Guide for Creators: Build Attention-First Reels
  2. viral video ai video studio on Call to Action in Video: How to Write, Place and Add One
  3. AI attractiveness test on Video Overlays: A Complete Guide for Creators in 2026
  4. cici on Keep 1080×1920 TikTok Quality Editing on Desktop, Preview on Phone
  5. plinko idle game on How to Make a Slideshow on Facebook in 2026

Archives

  • November 2026
  • October 2026
  • September 2026
  • August 2026
  • July 2026
  • June 2026

Categories

  • Video

Copyright 2026 — Kudoflix Video Editing. All rights reserved.